source: project/wiki/man/4/Using the compiler @ 14863

Last change on this file since 14863 was 14863, checked in by Kon Lovett, 10 years ago

Added -no-argc/bound/procedure-checks & -no-procedure-checks-for-usual-bindings options.

File size: 24.8 KB
Line 
1[[tags: manual]]
2[[toc:]]
3
4== Using the compiler
5
6The interface to {{chicken}} is intentionally simple.  System
7dependent makefiles, shell-scripts or batch-files should perform
8any necessary steps before and after invocation of {{chicken}}.
9A program named {{csc}} provides a much simpler
10interface to the Scheme- and C-compilers and linker. Enter
11
12 csc -help
13
14on the command line for more information.
15
16=== Compiler command line format
17
18 chicken FILENAME {OPTION}
19
20{{FILENAME}} is the complete pathname of the source file that is to
21be translated into C. A filename argument of {{-}} specifies that
22the source text should be read from standard input. Note that the filename
23has to be the first argument to {{chicken}}.
24
25Possible options are:
26
27; -analyze-only : Stop compilation after first analysis pass.
28
29; -benchmark-mode : Equivalent to {{-no-trace -no-lambda-info -optimize-level 4}} {{-fixnum-arithmetic -disable-interrupts -block -inline -lambda-lift}}.
30
31; -block : Enable block-compilation. When this option is specified, the compiler assumes that global variables are not modified outside this compilation-unit.  Specifically, toplevel bindings are not seen by {{eval}} and unused toplevel bindings are removed.
32
33; -case-insensitive : Enables the reader to read symbols case insensitive. The default is to read case sensitive (in violation of R5RS).  This option registers the {{case-insensitive}} feature identifier.
34
35; -check-syntax : Aborts compilation process after macro-expansion and syntax checks.
36
37; -debug MODES : Enables one or more compiler debugging modes. {{MODES}} is a string of characters that select debugging information about the compiler that will be printed to standard output.
38
39     t          show time needed for compilation
40     b          show breakdown of time needed for each compiler pass
41     o          show performed optimizations
42     r          show invocation parameters
43     s          show program-size information and other statistics
44     a          show node-matching during simplification
45     p          show execution of compiler sub-passes
46     l          show lambda-lifting information
47     m          show GC statistics during compilation
48     n          print the line-number database
49     c          print every expression before macro-expansion
50     u          lists all unassigned global variable references
51     x          display information about experimental features
52     D          when printing nodes, use node-tree output
53     N          show the real-name mapping table
54     U          show expressions after the secondary user pass
55     0          show database before lambda-lifting pass
56     L          show expressions after lambda-lifting
57     M          show syntax-/runtime-requirements
58     1          show source expressions
59     2          show canonicalized expressions
60     3          show expressions converted into CPS
61     4          show database after each analysis pass
62     5          show expressions after each optimization pass
63     6          show expressions after each inlining pass
64     7          show expressions after complete optimization
65     8          show database after final analysis
66     9          show expressions after closure conversion
67
68; -debug-level LEVEL : Selects amount of debug-information. {{LEVEL}} should be an integer.
69
70     -debug-level 0             is equivalent to -no-trace -no-lambda-info
71     -debug-level 1             is equivalent to -no-trace
72     -debug-level 2             does nothing (the default)
73
74; -disable-interrupts : Equivalent to the {{(disable-interrupts)}} declaration. No interrupt-checks are generated for compiled programs.
75
76; -disable-stack-overflow-checks : Disables detection of stack overflows. This is equivalent to running the compiled executable with the {{-:o}} runtime option.
77
78; -disable-warning CLASS : Disables specific class of warnings, may be given multiple times. The following classes are defined:
79
80     usage              warnings related to command-line arguments
81     type               warnings related to type-conversion
82     ext                warnings related to extension libraries
83     var                warnings related to variable- and syntax-definitions and use
84     const              warnings related to constant-definitions
85     syntax             syntax-related warnings
86     redef              warnings about redefinitions of standard- or extended-bindings
87     call               warnings related to known procedure calls
88     ffi                warnings related to the foreign function interface
89
90; -dynamic : This option should be used when compiling files intended to be loaded dynamically into a running Scheme program.
91
92; -epilogue FILENAME : Includes the file named {{FILENAME}} at the end of the compiled source file. The include-path is not searched. This option may be given multiple times.
93
94; -emit-external-prototypes-first : Emit prototypes for callbacks defined with {{define-external}} before any other foreign declarations. This is sometimes useful, when C/C++ code embedded into the a Scheme program has to access the callbacks. By default the prototypes are emitted after foreign declarations.
95
96; -emit-import-library MODULE : Specifies that an import library named {{MODULE.import.scm}} for the named module should be generated (equivalent to using the {{emit-import-library}} declaration).
97
98; -emit-inline-file FILENAME : Write procedures that can be globally inlined in internal form to {{FILENAME}}, if global inlining is enabled. Implies {{-inline -local}}.
99
100; -explicit-use : Disables automatic use of the units {{library, eval}} and {{extras}}. Use this option if compiling a library unit instead of an application unit.
101
102; -extend FILENAME : Loads a Scheme source file or compiled Scheme program (on systems that support it) before compilation commences. This feature can be used to extend the compiler.  This option may be given multiple times. The file is also searched in the current include path and in the extension-repository.
103
104; -feature SYMBOL : Registers {{SYMBOL}} to be a valid feature identifier for {{cond-expand}}. Multiple symbols may be given, if comma-separated.
105
106; -fixnum-arithmetic : Equivalent to {{(fixnum-arithmetic)}} declaration. Assume all mathematical operations use small integer arguments.
107
108; -heap-size NUMBER : Sets a fixed heap size of the generated executable to {{NUMBER}} bytes. The parameter may be followed by a  {{M}} ({{m}}) or {{K}} ({{k}}) suffix which stand for mega- and kilobytes, respectively.  The default heap size is 5 kilobytes. Note that only half of it is in use at every given time.
109
110; -heap-initial-size NUMBER : Sets the size that the heap of the compiled application should have at startup time.
111
112; -heap-growth PERCENTAGE : Sets the heap-growth rate for the compiled program at compile time (see: {{-:hg}}).
113
114; -heap-shrinkage PERCENTAGE : Sets the heap-shrinkage rate for the compiled program at compile time (see: {{-:hs}}).
115
116; -help : Print a summary of available options and the format of the command line parameters and exit the compiler.
117
118; -ignore-repository : Do not load any extensions from the repository (treat repository as empty). Also do not consult compiled (only interpreted) import libraries in {{import}} forms.
119
120; -include-path PATHNAME : Specifies an additional search path for files included via the {{include}} special form. This option may be given multiple times. If the environment variable {{CHICKEN_INCLUDE_PATH}} is set, it should contain a list of alternative include pathnames separated by {{;}}.
121
122; -inline : Enable procedure inlining for known procedures of a size below the threshold (which can be set through the {{-inline-limit}} option).
123
124; -inline-global : Enable cross-module inlining (in addition to local inlining).
125
126; -inline-limit THRESHOLD : Sets the maximum size of a potentially inlinable procedure. The default threshold is {{20}}.
127
128; -keyword-style STYLE : Enables alternative keyword syntax, where {{STYLE}} may be either {{prefix}} (as in Common Lisp), {{suffix}} (as in DSSSL) or {{none}}. Any other value is ignored. The default is {{suffix}}.
129
130; -keep-shadowed-macros : Do not remove macro definitions with the same name as assigned toplevel variables (the default is to remove the macro definition).
131
132; -lambda-lift : Enable the optimization known as lambda-lifting.
133
134; -local : Assume toplevel variables defined in the current compilation unit are not externally modified.
135
136; -no-argc-checks : disable argument count checks
137
138; -no-bound-checks : disable bound variable checks
139
140; -no-lambda-info : Don't emit additional information for each {{lambda}} expression (currently the argument-list, after alpha-conversion/renaming).
141
142; -no-parentheses-synonyms STYLE : Disables list delimiter synonyms, [..] and {...} for (...).
143
144; -no-procedure-checks : disable procedure call checks
145
146; -no-procedure-checks-for-usual-bindings :  disable procedure call checks only for usual bindings
147
148; -no-symbol-escape : Disables support for escaped symbols, the |...| form.
149
150; -no-trace : Disable generation of tracing information. If a compiled executable should halt due to a runtime error, then a list of the name and the line-number (if available) of the last procedure calls is printed, unless {{-no-trace}} is specified. With this option the generated code is slightly faster.
151
152; -no-warnings : Disable generation of compiler warnings.
153
154; -nursery NUMBER :
155; -stack-size NUMBER : Sets the size of the first heap-generation of the generated executable to {{NUMBER}} bytes. The parameter may be followed by a {{M}} ({{m}}) or {{K}} ({{k}}) suffix.  The default stack-size depends on the target platform.
156
157; -optimize-leaf-routines : Enable leaf routine optimization.
158
159; -optimize-level LEVEL : Enables certain sets of optimization options. {{LEVEL}} should be an integer.
160
161     -optimize-level 0          does nothing.
162     -optimize-level 1          is equivalent to -optimize-leaf-routines
163     -optimize-level 2          is currently the same as -optimize-level 1
164     -optimize-level 3          is equivalent to -optimize-leaf-routines -local -inline
165     -optimize-level 4          is equivalent to -optimize-leaf-routines -local -inline -unsafe
166
167; -output-file FILENAME : Specifies the pathname of the generated C file. Default is {{FILENAME.c}}.
168
169; -postlude EXPRESSIONS : Add {{EXPRESSIONS}} after all other toplevel expressions in the compiled file.  This option may be given multiple times. Processing of this option takes place after processing of {{-epilogue}}.
170
171; -prelude EXPRESSIONS : Add {{EXPRESSIONS}} before all other toplevel expressions in the compiled file.  This option may be given multiple times. Processing of this option takes place before processing of {{-prologue}}.
172
173; -profile :
174; -accumulate-profile : Instruments the source code to count procedure calls and execution times. After the program terminates (either via an explicit {{exit}} or implicitly), profiling statistics are written to a file named {{PROFILE}}. Each line of the generated file contains a list with the procedure name, the number of calls and the time spent executing it. Use the {{chicken-profile}} program to display the profiling information in a more user-friendly form. Enter {{chicken-profile}} with no arguments at the command line to get a list of available options. The {{-accumulate-profile}} option is similar to {{-profile}}, but the resulting profile information will be appended to any existing {{PROFILE}} file. {{chicken-profile}} will merge and sum up the accumulated timing information, if several entries for the same procedure calls exist.
175
176; -profile-name FILENAME : Specifies name of the generated profile information (which defaults to {{PROFILE}}. Implies {{-profile}}.
177
178; -prologue FILENAME : Includes the file named {{FILENAME}} at the start of the compiled source file.  The include-path is not searched. This option may be given multiple times.
179
180; -r5rs-syntax : Disables the Chicken extensions to R5RS syntax. Does not disable [[Non-standard read syntax|non-standard read syntax]].
181
182; -raw : Disables the generation of any implicit code that uses the Scheme libraries (that is all runtime system files besides {{runtime.c}} and {{chicken.h}}).
183
184; -require-extension NAME : Loads the extension {{NAME}} before the compilation process commences. This is identical to adding {{(require-extension NAME)}} at the start of the compiled program. If {{-uses NAME}} is also given on the command line, then any occurrences of {{-require-extension NAME}} are replaced with {{(declare (uses NAME))}}. Multiple names may be given and should be separated by {{,}}.
185
186; -static-extension NAME : similar to {{-require-extension NAME}}, but links extension statically (also applies for an explicit {{(require-extension NAME)}}).
187
188; -compile-syntax : Makes macros also available at run-time. By default macros are not available at run-time.
189
190; -to-stdout : Write compiled code to standard output instead of creating a {{.c}} file.
191
192; -unit NAME : Compile this file as a library unit. Equivalent to {{-prelude "(declare (unit NAME))"}}
193
194; -unsafe : Disable runtime safety checks.
195
196; -unsafe-libraries : Marks the generated file for being linked with the unsafe runtime system. This should be used when generating shared object files that are to be loaded dynamically. If the marker is present, any attempt to load code compiled with this option will signal an error.
197
198; -uses NAME : Use definitions from the library unit {{NAME}}. This is equivalent to {{-prelude "(declare (uses NAME))"}}. Multiple arguments may be given, separated by {{,}}.
199
200; -no-usual-integrations : Specifies that standard procedures and certain internal procedures may be redefined, and can not be inlined. This is equivalent to declaring {{(not usual-integrations)}}.
201
202; -version : Prints the version and some copyright information and exit the compiler.
203
204; -verbose : Prints progress information to standard output during compilation.
205
206The environment variable {{CHICKEN_OPTIONS}} can be set to a string
207with default command-line options for the compiler.
208
209=== Runtime options
210
211After successful compilation a C source file is generated and can be
212compiled with a C compiler. Executables generated with CHICKEN (and the
213compiler itself) accept a small set of runtime options:
214
215; {{-:?}} : Shows a list of the available runtime options and exits the program.
216
217; {{-:aNUMBER}} : Specifies the length of the buffer for recording a trace of the last invoked procedures. Defaults to 16.
218
219; {{-:b}} : Enter a read-eval-print-loop when an error is encountered.
220
221; {{-:B}} : Sounds a bell (ASCII 7) on every major garbage collection.
222
223; {{-:c}} : Forces console mode. Currently this is only used in the interpreter ({{csi}}) to force output of the {{#;N>}} prompt even if stdin is not a terminal (for example if running in an {{emacs}} buffer under Windows).
224
225; {{-:d}} : Prints some debug-information at runtime.
226
227; {{-:D}} : Prints some more debug-information at runtime.
228
229; {{-:fNUMBER}} : Specifies the maximal number of currently pending finalizers before finalization is forced.
230
231; {{-:hNUMBER}} : Specifies fixed heap size
232
233; {{-:hgPERCENTAGE}} : Sets the growth rate of the heap in percent. If the heap is exhausted, then it will grow by {{PERCENTAGE}}. The default is 200.
234
235; {{-:hiNUMBER}} : Specifies the initial heap size
236
237; {{-:hmNUMBER}} : Specifies a maximal heap size. The default is (2GB - 15).
238
239; {{-:hsPERCENTAGE}} : Sets the shrink rate of the heap in percent. If no more than a quarter of {{PERCENTAGE}} of the heap is used, then it will shrink to {{PERCENTAGE}}. The default is 50.  Note: If you want to make sure that the heap never shrinks, specify a value of {{0}}.  (this can be useful in situations where an optimal heap-size is known in advance).
240
241; {{-:o}} : Disables detection of stack overflows at run-time.
242
243; {{-:r}} : Writes trace output to stderr. This option has no effect with in files compiled with the {{-no-trace}} options.
244
245; {{-:sNUMBER}} : Specifies stack size.
246
247; {{-:tNUMBER}} : Specifies symbol table size.
248
249; {{-:w}} : Enables garbage collection of unused symbols. By default unused and unbound symbols are not garbage collected.
250
251; {{-:x}} : Raises uncaught exceptions of separately spawned threads in primordial thread. By default uncaught exceptions in separate threads are not handled, unless the primordial one explicitly joins them. When warnings are enabled (the default) and {{-:x}} is not given, a warning will be shown, though.
252
253The argument values may be given in bytes, in kilobytes (suffixed with
254{{K}} or {{k}}), in megabytes (suffixed with {{M}}
255or {{m}}), or in gigabytes (suffixed with {{G}}
256or {{g}}). Runtime options may be combined, like {{-:dc}},
257but everything following a {{NUMBER}} argument is ignored. So
258{{-:wh64m}} is OK, but {{-:h64mw}} will not enable GC of
259unused symbols.
260=== Examples
261
262==== A simple example (with one source file)
263
264To compile a Scheme program (assuming a UNIX-like environment) consisting of a single source file, perform the following steps.
265
266===== Writing your source file
267
268In this example we will assume your source file is called {{foo.scm}}:
269
270<enscript highlight=scheme>
271;;; foo.scm
272
273(define (fac n)
274  (if (zero? n)
275      1
276      (* n (fac (- n 1))) ) )
277
278(write (fac 10))
279(newline)
280</enscript>
281
282===== Compiling your program
283
284Compile the file {{foo.scm}}:
285
286 % csc foo.scm
287
288This will produce the {{foo}} executable:
289
290 % ls
291 foo  foo.scm
292
293===== Running your program
294
295To run your newly compiled executable use:
296
297 % foo
298 3628800
299
300If you get a {{foo: command not found}} error, you might want to try with {{./foo}} instead
301(or, in Unix machines, modify your {{PATH}} environment variable to include your current directory).
302==== An example with multiple files
303
304If multiple bodies of Scheme code are to be combined into a single
305executable, then we have to compile each file and link the resulting
306object files together with the runtime system.
307
308Let's consider an example where your program consists of multiple source files.
309
310===== Writing your source files
311
312The declarations in these files specify which of the compiled files is the main
313module, and which is the library module. An executable can only have
314one main module, since a program has only a single entry-point. In this
315case {{foo.scm}} is the main module, because it doesn't have a
316{{unit}} declaration:
317
318<enscript highlight=scheme>
319;;; foo.scm
320
321; The declaration marks this source file as dependant on the symbols provided
322; by the bar unit:
323(declare (uses bar))
324
325(write (fac 10)) (newline)
326</enscript>
327
328{{bar.scm}} will be our library:
329
330<enscript highlight=scheme>
331;;; bar.scm
332
333; The declaration marks this source file as the bar unit.  The names of the
334; units and your files don't need to match.
335(declare (unit bar))
336
337(define (fac n)
338  (if (zero? n)
339      1
340      (* n (fac (- n 1))) ) )
341</enscript>
342
343===== Compiling and running your program
344
345You should compile your two files with the following commands:
346
347 % csc -c bar.scm
348 % csc -c foo.scm
349
350That should produce two files, {{bar.o}} and {{foo.o}}.
351They contain the code from your source files in compiled form.
352
353To link your compiled files use the following command:
354
355 % csc foo.o bar.o -o foo
356
357This should produce the {{foo}} executable, which you can run just as in the previous example.
358At this point you can also erase the {{*.o}} files.
359
360You could avoid one step and link the two files just as {{foo.scm}} is compiled:
361
362 % csc -c bar.scm
363 % csc foo.scm bar.o -o foo
364
365Note that if you want to distribute your program, you might want it to
366follow the GNU Coding Standards.  One relatively easy way to achieve
367this is to use Autoconf and Automake, two tools made for this specific
368purpose.
369
370=== Extending the compiler
371
372The compiler supplies a couple of hooks to add user-level passes to the
373compilation process. Before compilation commences any Scheme source files
374or compiled code specified using the {{-extend}} option are loaded
375and evaluated.  The parameters {{user-options-pass, user-read-pass,
376user-preprocessor-pass, user-pass, user-pass-2}} and {{user-post-analysis-pass}} can be set
377to procedures that are called to perform certain compilation passes
378instead of the usual processing (for more information about parameters
379see: [[Supported language]].
380
381; [parameter] user-options-pass : Holds a procedure that will be called with a list of command-line arguments and should return two values: the source filename and the actual list of options, where compiler switches have their leading {{-}} (hyphen) removed and are converted to symbols.  Note that this parameter is invoked '''before''' processing of the {{-extend}} option, and so can only be changed in compiled user passes.
382
383; [parameter] user-read-pass : Holds a procedure of three arguments. The first argument is a list of strings with the code passed to the compiler via {{-prelude}} options. The second argument is a list of source files including any files specified by {{-prologue}} and {{-epilogue}}. The third argument is a list of strings specified using {{-postlude}} options. The procedure should return a list of toplevel Scheme expressions.
384
385; [parameter] user-preprocessor-pass : Holds a procedure of one argument. This procedure is applied to each toplevel expression in the source file '''before''' macro-expansion. The result is macro-expanded and compiled in place of the original expression.
386
387; [parameter] user-pass : Holds a procedure of one argument. This procedure is applied to each toplevel expression '''after''' macro-expansion.  The result of the procedure is then compiled in place of the original expression.
388
389; [parameter] user-post-analysis-pass : Holds a procedure that will be called after every performed program analysis pass. The procedure (when defined) will be called with seven arguments: a symbol indicating the analysis pass, the program database, the current node graph, a getter and a setter-procedure which can be used to access and manipulate the program database, which holds various information about the compiled program, a pass iteration count, and an analysis continuation flag. The getter procedure should be called with two arguments: a symbol representing the binding for which information should be retrieved, and a symbol that specifies the database-entry. The current value of the database entry will be returned or {{#f}}, if no such entry is available. The setter procedure is called with three arguments: the symbol and key and the new value. The pass iteration count currently is meaningful only for the 'opt pass. The analysis continuation flag will be {{#f}} for the last 'opt pass. For information about the contents of the program database contact the author.
390
391Loaded code (via the {{-extend}} option) has access to the library
392units {{extras, srfi-1, srfi-4, utils, regex}} and the pattern matching macros.
393Multithreading is not available.
394
395Note that the macroexpansion/canonicalization phase of the compiler adds
396certain forms to the source program.  These extra expressions are not
397seen by {{user-preprocessor-pass}} but by {{user-pass}}.
398
399=== Distributing compiled C files
400
401It is relatively easy to create distributions of Scheme projects that
402have been compiled to C.  The runtime system of CHICKEN consists of only
403two handcoded C files ({{runtime.c}} and {{chicken.h}}), plus
404the file {{chicken-config.h}}, which is generated by the build process. All
405other modules of the runtime system and the extension libraries are just
406compiled Scheme code. The following example shows a minimal application, which
407should run without changes on the most frequent operating systems, like Windows,
408Linux or FreeBSD:
409
410Let's take a simple example.
411
412<enscript highlight=scheme>
413; hello.scm
414
415(print "Hello, world!")
416</enscript>
417
418  % chicken hello.scm -optimize-level 3 -output-file hello.c
419
420Compiled to C, we get {{hello.c}}. We need the files {{chicken.h}} and
421{{runtime.c}}, which contain the basic runtime system, plus the three
422basic library files {{library.c}}, {{eval.c}} and {{extras.c}} which
423contain the same functionality as the library linked into a plain
424CHICKEN-compiled application, or which is available by default in the
425interpreter, {{csi}}:
426
427  % cd /tmp
428  %echo '(print "Hello World.")' > hello.scm
429  % cp $CHICKEN_BUILD/runtime.c .
430  % cp $CHICKEN_BUILD/library.c .
431  % cp $CHICKEN_BUILD/eval.c    .
432  % cp $CHICKEN_BUILD/extras.c  .
433  % gcc -static -Os -fomit-frame-pointer runtime.c library.c eval.c \
434    extras.c hello.c -o hello -lm
435
436Now we have all files together, and can create an tarball containing all the files:
437
438 % tar cf hello.tar Makefile hello.c runtime.c library.c eval.c extras.c chicken.h
439 % gzip hello.tar
440
441This is naturally rather simplistic. Things like enabling dynamic loading, estimating
442the optimal stack-size and selecting supported features of the host system would need
443more configuration- and build-time support. All this can be addressed using more
444elaborate build-scripts, makefiles or by using autoconf/automake.
445
446Note also that the size of the application can still be reduced by removing {{extras}} and
447{{eval}} and compiling {{hello.scm}} with the {{-explicit-use}} option.
448
449For more information, study the CHICKEN source code and/or get in
450contact with the author.
451
452---
453Previous: [[The User's Manual]]
454
455Next: [[Using the interpreter]]
Note: See TracBrowser for help on using the repository browser.